台湾宾果28


台湾宾果28
  • 电  话: 010-67158267
          67151949
          67151268
  • 进口业务:
     郭久龙 13911981648
     吕奎达 18513244398
     冯长浩 18513249048
    出口业务:
     张经理 13801218972
  • 传真: 010-67158269
  • 邮箱:
  • 地址: 北京市崇文区左安门内大街8号伟图大厦318室
  • 邮编: 100061
产品介绍
绣花机

型号规格:

头数 20头
头距 550 mm
针数 9针
产品型号 GYH/P-920-55-68 刺 绣 范 围 550X680mm
产品尺寸 7625X1810mm 包 装 尺 寸 7725X2010mm
产品净重 3.5T 产 品 毛 重 3.5T

基本参数:

针长 0.1-12.7mm
速度 300-850rpm/300-1000rpm
主轴马达 高效AC伺服马达/励磁马达X2
X.Y电机 脉冲马达X2
电源 单相220V/240V(50/60HZ); 三相220V/240V/380V(50/60HZ)
功率 0.8kw/1.0kw/1.5kw
储存量 标准:1,000,000 针

主要功能特点:

花样存储能力 内存容量1000000针,最多可存储99个花样,具有足够的容量
花样任意缩放及旋转 花样可在50%-200%范围,以1%为单间位对花样进行放大或缩小,或以1为单位,对花样进行任意角度旋转及镜像。
适应性强 二进制、三进制及ZSK制式的磁盘输入
平包针补偿 可根据需要,对平包针的针迹长度进行增加或减少
多国语言系统 单可支持中、英、韩西班牙、土耳其等语言的转换
速度自动控制 刺绣过程中,根据针迹的特点,自动控制刺绣速度的变化,便得刺绣理稳定,最高转速可达750-800转/分钟
自动反复绣作 经过对机器的设定,同一花样可实现纵横方向多达次的绣作
花样周边空走 刺绣前,可用此功能进行同边空走及绣出中心十字线,方便定位,尤其适合帽绣
内存花样的显示 采用大屏草帽液晶显示,所有内存花样可以观看其图形,对选择花样的刺绣和花样的输出极为方便
高低速针迹空走 在刺绣中可配合使用低速空走、高速空走及多种方式的空走,更加方便补绣,对位等
USBR接口(可选) 增加USB接口可直接插入U盘,与普通相比,U盘容量更大,读写速度更快,携代管理更方便。

绣花机

Type and standard:

Head 224heads
Head interval 137mm
Needle 3Stitches
Product type GYH/P-920-55-68 Embroidery area 550x680mm/td>
Table size 7625x1810mm Packing size 7725x2010mm
Suttle 3.5T Gross weight 3.5T

Specifications:

Stitch length 0.1-12.7mm
Speed 300-850rpm/300-1000rpm
Main motor High Efficiency AC Servo Motor/Excitation Motor X 2
X.Ymotor Pulse MotorX2
Power source 1-phase220V/240V(50/60HZ); 3-phase220V/240V/380V(50/60HZ)
Power consumption 0.8kw/1.0kw/1.5kw
Memory capacity standard:1,000,000 stitches

Main Function Introduction:

Design Storage Capacity Storage up to 1000000.stitches and 99 designs
Design scaling and rotating Based on 1%,the design can be scaled within the range of 50%to 200%,it also can be rotated in any direction or angle based on 1°
Vast flexibility Suitable for .DST,DSB and DSZ.
Satin stitch compensation Satin stitch length can be enlarged or shortened.
Multi-language system The system supports chinese,english,korean,spanish,turkish and others,which be convenient to different customers.
Auto speed control Sewing speed is controlled according to design stitching characteristics,max speed up to 750-850RPM,high speed can up to 750-1000RPM.
Auto repeat After making a settlement,the same design can be repeated up to 99 times in X and /or Y directions.
Embroidering pattern periphery idle running This function can make idle running,the pattern periphery and center cross line can be embroidered,ti is very convenient to position using these methods.
Display of designing memory Using large LCD.it is pattern while selecting pattern for embroidery and output.
High speed,lower speed idle running It is more convenient for darning that using low speed idle ,high speed idle or other idle running.
USB Connector(Can choose) Increasing USB connector to insert Udisc directly,with larger capacity,faster speed reading and writing,make it more convenient.

  • QQ咨询

  • 在线咨询
台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,台湾宾果28,</html>